Posted in Product Reviews on Tuesday the 1st August 2017 by Vicki Ormerod
Hi everyone, it's Nicky here and nice to be back doing my second
If you have read my previous review or tutorials
you’ll know I’m much more of a sewer than a knitter so when I do
knit I usually go for smaller items that I won't get fed up with, and
there is nothing better than knitting for little ones so it's been
lovely to be given the opportunity try out Sirdar Snuggly Tiny Tots Yarn for Minerva Crafts.
I also enjoy the fact that small knits are so
transportable so I can be out enjoying the sun while still being
productive… after all we never know how long it will last!
The Tiny Tots Double Knit yarn comes in
29 different colours ranging from brighter shades with multi coloured
flecks to softer shades with neutral or white flecks. For my example
I have used Little Bee 986 & Snug 932. These are from the softer
of the shades but I love the fact that they still have a nice
The yarn is an Acrylic and Polyester
mix but has a lovely almost cotton texture with flecks/bobbles that
add an additional feature. I knitted from a standard DK baby pattern
using the stated needles, 3.25mm for the rib & 4mm for the
stocking stitch. The 4mm needle matched the ball band suggestion and
I found that they produced the correct tension for me, which is a
surprise as I'm usually a loose knitter so please make sure you take
the time to knit a tension square before you start your creation.
The pattern I used consisted totally of
2x2 rib and stocking stitch (knit a row, purl a row), changing
colours after a set number of rows. I carried the unused colour yarn
up the edge of the piece by twisting at the end of each row on that
side. The pattern stated 1x 50g ball of each colour and I finished
with some to spare.
The texture of the yarn was easy to
knit with and the bobbles didn't effect the knitting process at all
but I did find them a problem when I first started to put together.
They prevented me stitching the pieces together as they stopped the
yarn from sliding through.
This was solved when I realised they are
on a separate thread wound around the main yarn and could easily be
removed from a piece. This enabling the same wool to be used to sew
as I normally do.
The finished result was a soft knit
that happily went into the washing machine on a standard 40’ wash.
I didn't try the tumble dry but it naturally dried quickly, always a
plus for baby sizes! Unfortunately I can't add a pic of this cardigan
being modelled as grandbaby no3 not due quiet yet & it was too
big for teddy!
I really liked this wool and would
recommend it for tiny tots…… and for the not so tiny ones too,
I'm looking at the Fab Fluoro shade for some funky Glastonbury Leg
Warmers for myself :)
Thanks for reading my review!
Nicky @ SewandSnip
Posted in Projects on Monday the 31st July 2017 by Vicki Ormerod
Hi, it’s Ali from The Patchwork Fairy here. Today I’ve been trying something completely new from Minerva Crafts! They sent me a pair of Espadrille Bases which you can transform into a pair of summer shoes for yourself!
Now I love patchwork and crochet but there are lots of tutorials for crochet and fabric espadrilles already on the internet so I decided to take a different approach to my new shoe project.
Here’s what they looked like to start with:
Here’s what I gathered together for my creative session! Can you guess how I’m going to make them?
I have some lovely coloured glue sticks which I thought would be perfect for making into beach shoes!
First though, measure your feet as though you had sandals on and mark out the dimensions on something heat resistant (ie not your foot!!).
Now make a rectangular lattice with the hot glue in the colours of your choice. The first time I used kitchen foil as a backing sheet but this proved to be a mistake as it was quite hard to peel off the glue lattice once it had dried. In the end I decided to leave some little bits which wouldn’t come off and treat them as part of the pattern!
I repeated the lattice making process for the other foot using some mermaid colours and this time used greaseproof baking paper. This worked very well and so I’d recommend using this unless you too want sandals with a bit of silver bling!
After about 10 minutes the glue lattice will be dry and could be carefully peeled off the paper.
Decide where you want to sew it onto the bases and mark one side, using some long pins.
Now take some strong thread which could be a beige cotton to match the espadrille bases or a more decorative crochet cotton which is to be seen. I opted for the latter and sewed on the first side using a pink Metallic Thread with a large eyed needle. You need to sew right through the sides of the shoe bases and weave the thread in between the lattice holes to secure the sides. For my second sandal I used a metallic green to complement the mermaid coloured top.
Once the first side is sewn you can fold the lattice over your foot and use a pin to mark where you should sew the second side down. Have it fairly snug over the top of your foot as it will stretch a little in use. You can cut off any excess lattice when you have finished sewing.
Try the shoes on for fit and comfort after a couple of stitches on the second side in case you need to make any alterations.
Once you have sewn both sides down and trimmed the lattice and thread ends they are ready to wear!
After a few minutes of walking I found mine started to come away on one side of the pink one where the lattice was just too delicate. Although the dainty thin swirly strips look pretty, they aren’t strong enough to stand up to actually walking in the shoes. However, an application of more glue down both sides seems to have fixed the problem completely. If you create a more structurally sound lattice, especially at the sides where it’s sewn, I think you may get away without the second application of glue.
So there we are! A fairly quick and fun way to make yourself a new pair of unique holiday sandals!
Hope you have a lovely summer!
Posted in Projects on Sunday the 30th July 2017 by Vicki Ormerod
Hello it's Georgina again!Sew... I made shoes! Well the uppers. I've never attempted to make anything like this before so as soon as Minerva asked for reviews of the Prym Espadrille Soles
I knew I wanted make some.
The soles come with the pattern pieces to make the standard design espadrilles. There are no instructions included but there are links provided to the instructions on the Prym website and their YouTube channel. I had a look at both types of instructions and both the written version with pictures and the video provided enough to details to make the uppers. The pattern is annotated in a few different languages so I highlighted the English instructions to make it quicker to refer to. Also to note is that there is no seam allowance included on the pattern pieces so remember to add that on.
If you are on Instagram you most likely have seen that Patches
are making a massive come back. I've been trying to resist buying any as I didn't know what I would "patch" them on to but then an idea popped into my head, patch shoes!My idea was that I would have a denim pair of espadrilles with patches on them. I have a few pairs of old jeans in my stash after following the #therefashioners2016 project last year so thought about using the pockets as the front sections. However when I attempted to do this they weren't quite the right size and were very thick to sew through. As my stash seems to be growing without me realising I found a piece of denim that was a lot thinner which was perfect. As I wanted the "jean" look here's want I did.For each sole cut out two denim fronts and a lining. I just used some blue cotton from my stash for the lining.Fold one of of the denim fronts at an angle. Make sure that the one for the other shoe is a mirror image.Top stitch close to the fold. I used a yellow gold colour to match the patches. Pin the folded front onto the non altered front. Top stitch again along the same line.So that the fronts aren't bulky I trimmed the folded section with pinking shears.
Decide where you want to add the patched and attach following the patch instructions.Pin on lining, right sides together. Sew together remembering to leave a gap for turning through. Pinking sheer the seams and turn through.
I used a wooden skewer to make sure the corners were nice and pointy. Iron flat.Top stitch around the edge. This will close the opening to save on hand sewing it closed.
Using lots of pins pin in place on the sole and check the fit.
Attach to the sole using Prym espadrille threat with a blanket stitch.
Ta dah new shoes!I haven't added the backs to these as we have been having lots of nice sunny weather but will probably add them in a few months time.Here are some tips you may find helpful.- Use a sturdy needle when sewing onto the soles. I snapped and bent a few needles in the process.- A thimble will save your thumb and finger from blisters. I found it quite hard to sew through the sole even when I used a sturdier pointier needle. - Use a long length of thread, Prym recommend a metre of thread, so you don't have joins when sewing onto the sole.- Remember the gathered section around the toes.- Use lots of pins to hold in place.- I used a pointy device to help with making a hole in all the layers of fabric when sewing through the corners. - Although the top stitching around the front isn't not really visible once they have been sewn onto the sole it did help as a guide for making the stitches even.
Thanks for reading,
Posted in Projects on Saturday the 29th July 2017 by Vicki Ormerod
What you will need:
1 metre of Miniature Animal print Cotton Poplin Fabric
(Bunnies) plus matching Gutermann Sewing Thread
Follow my step by step tutorial to help you create this sweet summer dress…
Start by washing, drying and pressing all your chosen fabrics. Also press your pattern flat too.
Because this pattern came in sizes 6 months to 4 years, I traced the size I needed (size 2) onto dress making paper (optional), allowing me to use the pattern again at a later date.
Once you have cut out your pattern, remember to make note of any markings from the pattern. Cut on fold of fabric (matching selvedge to selvedge) making sure you have the pattern of the fabric laying in the correct direction.
Use your pattern again to cut out the interfacing, once cut out, I then went around and trimmed off the ¼” seam allowance, as this makes the finished seam neater. Fuse your interfacing in the wrong side of the small front and back parts. I prepared the applique hearts by cutting them from the interfacing first, then roughly cutting out the pink fabric, fuse in place and trim 1/8” inside the interfacing, to avoid any fraying.
Take your applique hearts and pin in place on the front of the dress, see pattern for lay out. Trim away the excess from the edges. Using a pink top thread, and grey bobbin thread, blanket stitch around the edges to hold in place.
Photos below, illustrate the front and back applique...
Stay stitch front and back neck edges, (just a simple stitch sewn down from the top to the middle, and repeated on the other side, to allow the fabric to sit flat against the neck line).
With right sides together, sew the front to the back at side seams, using the 5/8” seam allowance. Press your seams open.
The dress is really starting to take shape now.
With right sides together, pin the interfacing to the neck, shoulder and armhole edges, matching the centers and side seams. Stitch neck, shoulder and armhole edges.
Create button holes, placement from the markings on the pattern, or Sew On Poppers
and a cute button for design. (Poppers are easier for younger children, as they can do it themselves).
Finishing off your Dress
Fold the side seams over twice and tack in place.
Fold the hem of the dress over twice and top stitch a neat line of stitches.
Fold over the seam on the interfacing (back and front pieces) and stitch a neat row of stitches. Using a ladder stitch to sew the interfacing seams together.
And here is the finished dress...
Thanks for reading,
Posted in Projects on Friday the 28th July 2017 by Vicki Ormerod
When Minerva kindly offered to let me test the Prym Espadrille Soles
I jumped at the chance! I'd seen a few pop up in my Instagram
feed and I'd always thought they looked like a really fun simple project to do and … they were!!
I'd originally planned to make them in denim, using the fabric cut off from a pair of ready to wear jeans that I'd turned into shorts. And I may still do that with my next pair. However, I'd also just finished pattern testing a brand new sewing pattern – a robe (I can't say more than that just yet!) which makes me feel like a screen goddess wearing it (To clarify, I don't look much like one, I just feel like one!) and it seemed the perfect opportunity to make a matching pair of slip on Espadrilles to go with it! No more old slippers and tatty towelling robe for me!
The process of making them is incredibly simple:
Because I was using remnants of the floaty Viscose Fabric
used for the robe, I interfaced it with some Lightweight Woven Interfacing
. I was only using the front piece, rather than the bit that goes around the heel too, as I really did want them to be slip-ons – you know what it's like when you drag yourself out if bed in search of that first coffee!
I then cut out a corresponding piece of lining fabric, in a plain white (but cotton) Cotton Fabric
. The pattern pieces do not come with a seam allowance so I drew around mine and added that extra 5/8ths of an inch. I sewed the now interfaced viscose right sides together with the cotton, leaving an approximate 1.5” gap (to allow you to turn them right side out). Once that's done, you trim back the seam allowances, turn them right side out and then slip stitch the gap closed.
Then pin them into place around the sole. There was something incredibly satisfying about this step, pushing those pins in…make sure to use sturdy ones!
I was originally going to sew them onto the sole using a matching embroidery thread (as shown in the pictures) but in the end I decided against this. Prym do have a range of Creative Yarn
in loads of colours too. I cut four equal long lengths of matching regular Gutermann Thread
(approximately 110 cms) and threaded these through a Darning Needle
together, so that the thickness and strength of the thread was there but yet it looked more subtle.
The robe I'm pairing it with is quite elegant and I wanted the finishing of the espadrilles to match that, so that the stitching itself was not a massive feature of the finished shoe. Of course that's a definite good look and I think with the denim pair I'd certainly use the creative yarn and make the stitches themselves bigger. They're incredibly simple to sew - it's a blanket style stitch – there is a 'how to' tutorial video from Prym if you want to see that in action.
All in all I'm really pleased with the finished pair! They look great with my robe. Now I can swan around looking put together even when I'm still on auto-pilot (I'm never fully functioning until at least two cups of coffee into the day!)
The design possibilities for these soles are practically endless and I can vouch for how surprisingly comfy they are! What can I say, get yourself a pair - you'll love them too! I just want Prym to make a wedged version too!!
Thanks so much Minerva for sending me the soles in return for this review - I'm genuinely thrilled with them!
Posted in Projects on Thursday the 27th July 2017 by Vicki Ormerod
We meet again, awesome people!
Sophie from www.sopbac.com here to tell you more about my use of this Cotton Lawn Fabric with an embroidered border detail in the silver grey colour I had the privilege to be
testing out for Minerva Crafts as one of their product testers.
fabric, I made the Centaurée dress Sewing Pattern from Deer and Doe. Other tools I used for the
dress that might be helpful is a Bias Binding Maker.
I choose to make the Centaurée dress pattern from Deer and Doe for
this fabric. I am making one for my sister for my wedding, so I’m testing the
pattern out. You can also get any of the Deer and Doe Patterns here at Minerva Crafts.
With the Centaurée dress pattern, I did three things for the first
time. Always learning! First, my first time using a border print fabric.
Second, I made my first own bias binding tape. Third, my first scalloped hem.
My first thought for the bias binding straps was to use store
bought contrasting binding. After a while, I thought to myself, why? I have the
tools to make the binding, am I really not going to do it just because I’m
“scared”? No way. It was really easy to make. I don’t know why I hesitated. In
retrospective, I think it would be even easier if the fabric was a bit stiffer
than the light weight of the cotton lawn this was, but I made it! The bias
binding is being used for the straps and to finish off the raw edges around the
bodice since the pattern isn’t lined.
I love the interesting bodice in this pattern. It is made up of
six pieces with a centre intersection. Great opportunity to do some contrasting
piping. I didn’t do it because I thought the bias binding straps should be the
same colour as the piping.
I wanted to show the beautiful floral embroidered border as much
as I could. The most natural way to do this was to cut it as a hem of the
gathered skirt in the pattern. That means cutting it along the selvedge.
The embroidered pattern had a scalloped hem. I wanted to make that
hem shine through a bit more. And it’s always fun with something new. I serged
the raw edges of the hem and folded it up, right sides together. Since the
scallops of the hem are made up by two small scallops on either side of a
bigger scallop I turned it into one whole. It made it much easier. Then I sewed
along the scalloped, cut it as near my stitching as possible, turned and
pressed the hem. I think it looks fantastic!
I didn’t do any alterations to the pattern at all, and I’m happy
with the fit in general. The fabric is a cotton lawn, so it’s naturally thin
and light. I probably should have lined the dress, but I figured nude underwear
would solve the problem. It might be a bit sheer if you’re using a coloured
undergarment. On the other hand, the light fabric is a perfect addition
to a summer wardrobe!
Posted in Product Reviews on Wednesday the 26th July 2017 by Vicki Ormerod
Sometimes it's nice as a sew-person to have really simple
instructions on a little card so you are not battling through reams of paper
instructions or pausing and starting YouTube. However, sometimes a simple piece
of card can leave you a little confused too.
The Villa Rosa Designs Quilting Patterns are just that, a little
postcard with all you need to make this quilt.
It tells you what you need (8 fat quarters and 2 and a quarter yards of
fabric). Then has some very basic instructions on putting it together.
Away I went, I sliced my fat quarters up. I love using Fat Quarters for Quilts, they are so readily available and usually so well
coordinated. I know you see lots of tutorials about what to make with fat
quarters but I find quilts the most satisfying by far. I chose a lovely bundle
in spring greens which came as a pack of 7 so I added one more from a woodland
themed pack I had.
I sliced and labelled, determined to be organised so the simple
instructions didnt catch me out.
I really enjoy the process of sewing up strips like this, I
find it one of the most relaxing parts of sewing, something that takes little
concentration and you can do whilst the TV or radio is on. It was slightly
overshadowed here by my nerves though as I was worried I would get the
placements wrong and I could see that this is would be crucial to the design.
It meant that I didn't manage to do much chain stitching, as I wanted to get it
right but I'm sure a more experienced quilter would be able to whiz through
At this point the pieces look like this...
I then sliced them in to five inch pieces, this is where
it got sticky because it says to make 4 lots of 5 inches from each strip, I'm
not sure if I did it wrong or the fat quarters were not to be relied upon but I
could only get three lots of 5 inch squares out of some of my Strips. However,
I've made it work so don't give up on this just yet!! I suspect that there is a direction in which to cut the fat quarters
and in it's determination to be concise there isn't any tips like this on the
I am not an experienced quilter so I don't want to patronise
anyone but the trick to getting this right is to continually label up and make
sure everything is facing the right direction.
I began to piece together the strips using the code on the
card and luckily, because of the way the blocks line up I managed to skip
around the 'not enough blocks' situation and sewed the patterns in place. It
has just meant that the quilt is shorter than it should be. Not the end of the
world. Luckily, I left the theme fabric until the end so I was able to cut it
However, I was unable to get the pattern running throughout
like the mirror image it shows on the card as I didn't have enough pieces but I
still think it looks effective. You can still see a pattern between the block,
As you can see, there's quite a lot of doing as you see best
or that fits.
I quilted it by using chunky straight lines as I don't have
the equipment, time or patience to freehand or motion quilt and I think it
looks really smart.
As much as the colours I chose are pretty, I think to really
make the most of the pattern it needs really bright or contrasting colours. I
think it would help the pattern and make it look a little bit more modern. What
do you think?
In conclusion, whilst I think it's a charming little quilt
and a quick way to make a really effective pattern for a cute quilt, my warning
would be that it is definitely not for beginners! Measure, measure again and
label the life out of it!
Thanks for reading,
Emma @ Emma and her Machine
Posted in Product Reviews on Tuesday the 25th July 2017 by Vicki Ormerod
Who doesn’t love pompoms? I was so
excited to receive these Clover Pompom Makers from Minerva Crafts to
review. In this review, I’ll be giving a few tips on how to make
the use of these tools easier. The advantage of making your own
pompoms versus buying store bought pompoms is you can make it as
fluffy, as big or small and as colorful as you want.
I started doing ‘research’ right
away (pinterest, instagram, etc) to figure out what to make with
these treasures. I was so overwhelmed with all the crafts you can
make with pompoms, I finally decided to make something I’ll
actually use regularly so to try I decided to make bookmarks and a
Tip #1: Use a small scissors
such as an embroidery scissors especially if you have an extra small
I received a small and an extra small package. One advice I
have for anyone planning to buy these makers especially in the extra
small size is make sure you have small scissors (such as embroidery
scissors) as well. This will make cutting the yarn once it’s
wrapped around the tool easy to cut. I struggled with my scissors for
a while but once I switched over to my Embroidery Scissors, I was in
Tip #2: The more yarn you wrap
around, the fluffier your pompom gets.
I wanted medium fluffiness for my
bookmark, which was inspired by several pinterest posts. I used the
small pompom tool to make these, cut out hearts from felts to cover
the knot on the other end by sewing a pair of the felt hearts
together and voila! You have yourself a fun, diy, and functional
Tip #3: Tie more than one knot
when securing your pompom.
This helps ensure that the yarn is
strongly in place. I made a wall art piece using all the sizes I received,
another pinterest inspired project. This will find a home in my
sewing room soon.
The instructions on the back on the
pompom packaging are great but it still took me three pompoms to get
used to making perfect pompoms. So don’t expect to have a perfect
one the first time. Just keep at it and you’ll find you get better
with each pompom you make. Enjoy and go crazy with these little
Sylvia from The Ravel Out
Posted in Company News on Tuesday the 25th July 2017 by Vicki Ormerod
Today we bring you news of a new chapter for Minerva Crafts. It is a family business run by myself (Vicki) and my mum and dad, (Annette and Phil), and the three of us have worked together in the business since I was 8 years old.
As some of you will know, Minerva Crafts not only sell online, we also have a physical retail shop called the 'Minerva Craft Centre' at our base in Darwen, Lancashire, which is attached to our warehouse. The shop has been very successful for us and we are very proud to have won 3 awards for it over the last 5 years. It is my mum Annette who has run the "bricks and mortar" side of the business for us, with a fantastic team of staff, whereas my dad and I look after the "online" side of the business.
My mum decided a year ago, after working 6/7 days a week for as long as I can remember, to take a bit more time away from work and spend a few days a week looking after the newest addition to our family - her grand-daughter, baby Emily - whom we all adore. We all feel really happy about my mum doing this, as it is definitely the best thing personally for her to do right now.
With my mum now working less hours, we have been faced with a decision about what to do with the managing of the shop. Our shop and the online side of the business run completely separately from each other and are very different (even though they sell the same products!). Our shop is huge and it takes a huge amount of resources in both time and money to keep it running. For about a year now we have been running it with my mum only working part time and we have definitely felt the strain. We have known for some time now that something had to give.
We do feel, very strongly, that we wish to remain a family run company with us at the heart of it. It just wouldn't be the same for us to run the shop with anyone else other than my mum. We also face the same struggles that many shops do nowadays, with increased costs at every turn, and the shop would struggle to support a bigger team of staff than it does currently. We have, therefore, finally come to a decision and decided to close our shop. This has not been, in any way, an easy decision for us, and we have been considering the idea - toying backwards and forwards for a long time now - to make sure we are making the right decision.
We are sincerely sorry to every customer who only shops with us in our physical shop - we are sure there will be many of you who will be very disappointed to see the shop close. We hope that you will understand our decision in this rapidly changing world, and we hope you will continue to support us in our new chapter.
On a positive note, we are very much looking to the future here at Minerva HQ. We are looking forward to being able to fully concentrate on the online side of our business which we absolutely love. We can put our full efforts and energies into our website and serving our amazing customers all over the world. The shop space will be fully utilised for more warehousing, which will allow us to introduce even more beautiful products to our range on the website. Also, our fantastic team of staff in the shop are all fully trained in the warehouse too, so nobody will be leaving us.
My mum is really looking forward to now being able to spend more time sewing and making things with all our beautiful products. Her role at Minerva will, of course, change and now she will be able to focus on writing informative and inspirational posts for the Minerva Crafts blog. My mum has been a dressmaker and crafter all her life and has so much inspiration and knowledge to share, I am sure you are going to love all of her ideas!
It will be a very sad day for us to see the shop close, but we are all fully embracing this new chapter here at Minerva. We can only apologise again to everyone who will miss being able to use our shop and we hope that you will understand our desicion and will continue to support us in the future.
If you prefer to talk to someone rather than shop online, you will be able to place an order with us over the telephone on 01254 708068. You will also be able to arrange to collect your parcel from us if you live locally. This allows you to view over 100,000 products that we now sell! This would never have been possible just by visiting the shop.
We plan to close the shop on the 27th of August 2017, so our last day of trading will be Saturday the 26th of August. For any of our customers who are Minerva Craft Club members, and who only purchase from us in the shop - please pop in with your card between now and then, if you wish to cancel your subscription. A refund will be made for the remainder of the period.
Thank you for reading and for your continued support over the years,
Vicki, Annette and Phil
Posted in Product Reviews on Monday the 24th July 2017 by Annette
Summer is in full bloom (I saw that on a bill board this morning and thought mmmm is it?) and what better way to celebrate it than to wear something soft and floaty. Whether you are going to a summer barbecue with friends or simply lounging around, sipping a cocktail, on your long awaited holiday. McCalls Sewing Pattern
7566 fits the bill perfectly.
This is such a pretty style and shows femininity at its best. Version C and D have a gorgeous full cape down to the waist. This cape is all in one piece across the back as the following photo of the lineart shows, therefore the zip for this is sewn within the seam.
The following photo shows how the neck edge of the back seam is sewn together with the zip starting about 2" down...
This allows the cape to be sewn in one piece and therefore flow freely.
After the cape is pinned on to the bodice the lining is then attached and the neckline then sewn all in one go.
When the lining is turned to the inside the cape is enclosed between the two layers. My choice of fabrics for today are Georgette Fabrics
and our generic description for these beautiful fabrics on our website is as follows...
"Georgette fabric is distinctive for its crinkly crepe-like texture, which feels slightly rough and dull, but gives the fabric a bouncy, flowing look. The overall appearance is slightly sheer, since the threads are very thin. The crepe-like texture of georgette fabric makes it very springy, so that the fabric almost appears to move on its own. It also drapes very well, making it a popular choice for women's clothing. Since georgette fabric is thin, it is also lightweight, and can be used as a layer in a larger garment without being heavy or bulky. Layers of georgette fabric may be used for a fanciful effect, especially in gowns and special occasion wear. Bridal gowns, evening dresses, and other formal wear are often made with georgette fabric because of these beautiful qualities. At Minerva Crafts we stock a lovely range of plain georgette fabrics with an ever changing range of georgette prints throughout the year".
My first choice for today is this Floral Fabric
. This also comes in blues, so pretty.
This would look lovely made up as version C and is £5.99 per mt. I love those Rose Gold Scissors
that just happened to appear in the photo, these are a very traditional scissor but have a very modern twist with the rose gold handles. The fabric is a slightly heavier fabric than the others I am showing you today but it is still very soft and flowing.
My choice for version D is this fab Paisley Fabric
, a little higher in price at £8.99 per mt.
This is quite a large design so I feel it is quite suited to a maxi dress.
I love the frill on version A and this is sewn in a similar way to the cape version, the frill enclosed within the neckline seam but this time the zip goes straight to the top. Yes of course we have lots of self-coloured georgettes (as it looks on the pattern) but I wanted to show you something a little different. So I have chose this spotty Georgette Fabric
. This is on offer at an amazing price of just £2.99 per mt. Yes you read that right!!
Take a look at some new sewing bits and bobs all from the Prym range....
I love the colour, a very pretty turquoise with white spots. My favourites are the Magnetic Pin Tray
and the Magnetic Needle Holder
. If you have never seen one of these before you 'wind up' the needle case to choose your needle and even if you tip it upside down they will not fall out. These two items are invaluable to me.
Last but not least for fabric today is this gorgeous multicoloured print Fabric
This is simply stunning and for me would make up perfectly as version B. This is the same basic dress but has been kept quite simple. Perfect for this very bright fabric because there are no frills or capes, just a V-neck, sleeveless and falling to the floor.
Hope you've enjoyed today's picks and thanks for reading,